Prefab replacement
Select a compatible receptor and wall kit.
Plan this optionExplore a scope and request a reviewed quote. Coastal confirms service availability, qualified trade partners, site conditions and final pricing before a proposal.
SHOWERS & TUBS
Shower replacement
Replace an existing shower with a coordinated base, wall, control, and enclosure system. Demolition exposes the conditions that determine whether the new shower can stay in place or requires additional repairs.
START WITH THE DETAILS
What goes into
the work.
Measure the existing base and wall height. Record drain location and threshold. Final product dimensions and waterproofing compatibility need verification.
Typical scope to confirm
- Measure the existing shower and confirm the replacement system
- Remove specified components and assess exposed substrates
- Install the listed base, walls, controls, and enclosure with required checks
Make it specific to your project.
Enter the amount of work and choose the details you know. Your choices follow you into the Project Builder.
LOW / MIDDLE / HIGH REFERENCE
Low$1,000per project
Middle$4,500per project
High$8,000per project
Low and high are published reference endpoints. Middle is their arithmetic midpoint, not a quoted average, product tier or firm price.
Match the reference scope first
- Confirm Base system before applying this reference to your quantity. The reference covers a prefabricated receptor/stall, not a tiled pan, bathtub or retained base.
- Confirm Wall system before applying this reference to your quantity. The displayed conversion/stall range is prefabricated, not a custom tiled shower.
The figures above remain the source reference. They do not price these selections or a complete installed project.
A planning reference for this service only. Selections, local labor, access, quantities and existing conditions need Coastal’s review. Do not add overlapping whole-project and component ranges.
HomeGuide · research checked 2026-10-22 · US national; no Oklahoma adjustment applied · installed
What changes the price
- Shower dimensions and access
- Prefab versus custom tile assembly
- Valve and drain changes
- Enclosure and specialty features
What the reference covers
- Prefab shower unit
- Installation labor
Allow for these separately
- Steam equipment or full wet-room construction unless specified
- Concealed structural or water-damage repairs beyond the written scope
- Custom tiled shower
- Unspecified demolition and concealed repairs
KNOW WHAT COMES NEXT
From first idea to finished work.
Plan the scope
Check the base, drain and wall condition before choosing replacement components.
Prepare and approve
Confirm plumbing, substrate condition and product availability before removal.
Complete the work
Install the approved drain/base, waterproofing and walls in the system sequence.
Review and close out
Complete required checks and cure times before use; review seals and care.
- Planning & preparation
- 2–8 weeks
- Work on site
- 4–15 working days
Illustrative planning allowance for the stated scope, not a promised start or completion date. On-site time starts after approvals and materials are ready; procurement, inspection waits, curing and discoveries can extend the calendar.
Tile versus prefabricated walls · Drain relocation and concealed repairs · Waterproofing checks, cure time and glass
PERMIT PLANNING
Check the scope and jurisdiction
New or altered electrical, plumbing and mechanical systems need permit review. Edmond lists limited minor-repair exceptions; OKC directs permitted trade work through licensed, registered contractors.
- New circuits, relocated fixtures or altered piping
- New or altered heating, cooling, gas or exhaust systems
- Changes beyond the local minor-repair exemption
ENGINEERING & DESIGN
Engineering is not usually needed
Engineering is not usually part of this finish-only scope. Stop for review if hidden damage, structural changes or unusual support loads are found.
- New structural work or damaged framing
- Unverified heavy-load support
Confirm requirements with the city or county responsible for the property before work begins. The address, exact scope and adopted code determine the final requirements.
Local permit & engineering sources
Oklahoma City — Development Center requirements ↗ Edmond — when a permit is needed ↗ Edmond — residential alteration checklist ↗MAKE IT FIT YOUR HOME
Your starting options.
Compare the scope before choosing products. Any direction can be refined with Coastal.
MATERIALS & DETAILS
Find your finish.
These original swatches show a general visual direction. Confirm a physical sample, exact finish code and product compatibility before ordering.
Shower wall finish directions
Smooth warm white
Generic visual direction; confirm the physical sample before ordering.
Use this direction
White subway pattern
Generic visual direction; confirm the physical sample before ordering.
Use this direction
Soft gray stone look
Generic visual direction; confirm the physical sample before ordering.
Use this directionBase finish directions
PRODUCT RESEARCH
Brands & real-world examples.
Manufacturer references help compare options. They do not imply a Coastal dealership, endorsement, or a product selected for your project.
Swan
Manufactured shower wall systems; verify substrate, base, and sealant compatibility.
Delta Faucet
Shower valves, hand showers, shower bases, and wall-system options.
Schluter Systems
Tile shower waterproofing, drains, trays, and related components.
Explore example photos
Open the original source for product and installation imagery. These are reference links, not Coastal project photographs.
Bathroom finish and fixture-layout inspiration. Photo by Alex Tyson on Unsplash; not a Coastal project.
Photograph illustrates a manufactured shower-wall finish. Manufacturer inspiration; not a Coastal project photograph.
Bathroom finish and fixture-layout inspiration. Photo by Alex Tyson on Unsplash; not a Coastal project.
YOUR PROJECT, VISUALIZED
Choose a direction.
See it in your space.
Start with common shower replacement options, personalize the details, then upload a photo to create an AI concept.
Prefab replacement
Select a compatible receptor and wall kit.
- Base system: Prefabricated receptor
- Wall system: Prefabricated panels
- Custom product, finish code, or request: Prefab replacement. Finish direction: Smooth warm white. Select a compatible receptor and wall kit.
Solid-surface walls
Pair fabricated or manufactured walls with a compatible base.
- Wall system: Solid surface
- Custom product, finish code, or request: Solid-surface walls. Finish direction: White subway pattern. Pair fabricated or manufactured walls with a compatible base.
Custom tile replacement
Coordinate substrate, waterproofing, tile, and drain details.
- Base system: Site-built tile pan
- Wall system: Tile with membrane
- Custom product, finish code, or request: Custom tile replacement. Finish direction: Soft gray stone look. Coordinate substrate, waterproofing, tile, and drain details.
FROM INSPIRATION TO YOUR SPACE
Your home. This direction.
The example photo is inspiration. Your personalized concept applies your saved service and finish selections to the photo you upload.
- Choose a preset and adjust its selections.
- Add a photo of the room or area.
- Create a concept, compare it, and keep it with your project.
AI concepts are illustrations. Product matches, measurements and feasibility require Coastal’s review.
YOUR NEXT STEP
Bring it into your plan.
Keep rooms, measurements and choices together in the Project Builder.
Related scopes
Research sources & pricing notes
Reviewed 2026-10-23. Published ranges describe the source’s stated scope and geography; they are not an Oklahoma adjustment or a Coastal estimate. Do not add overlapping project ranges together.
- Shower installation cost — HomeGuide · US national
- Shower wall systems — Swan · US national
- Showering products — Delta Faucet · US national
- Shower system — Schluter Systems · US national
Stock photograph license · Finish swatches and scope diagrams are original illustrations.