Explore a scope and request a reviewed quote. Coastal confirms service availability, qualified trade partners, site conditions and final pricing before a proposal.

WHOLE-HOME & ROOM RENOVATIONS

Open-concept conversions with structural coordination

Create a larger connection between rooms using a reviewed structural opening. Coordinate the beam, supports and affected utilities with the finished ceiling and floor plan.

Get a quote Start my project Try the visualizer Explore options

Specialist qualifications, responsibility and availability are confirmed for your project.

Interior renovation with exposed masonry, a wide opening, temporary supports and construction debris — Milivoj Kuhar · Unsplash License Illustrative interior demolition and layout work photographed in Croatia. Stock photograph; this is not a Coastal project or an example of specified site practices.

START WITH THE DETAILS

What goes into
the work.

Measure each room separately. Note ceiling height and walls or openings you want to change. Do not assume a wall can be removed.

Typical scope to confirm

Structural review and defined opening dimensions
Temporary support and permanent framing per approved design
Specified utility adjustments and finish restoration

Make it specific to your project.

Enter the amount of work and choose the details you know. Your choices follow you into the Project Builder.

LayoutOccupancyFlooringUtility changes

LOW / MIDDLE / HIGH REFERENCE

Low$4,000per project

Middle$7,000per project

High$10,000per project

Low and high are published reference endpoints. Middle is their arithmetic midpoint, not a quoted average, product tier or firm price.

A planning reference for this service only. Selections, local labor, access, quantities and existing conditions need Coastal’s review. Do not add overlapping whole-project and component ranges.

HomeGuide · research checked 2026-10-22 · US national; not an Oklahoma quote · installed

Continue with these selections ↗

What changes the price

Span and loads above the opening
Post and footing requirements
Beam concealment and utility rerouting

What the reference covers

Wall removal and ordinary finish work in the published comparison

Allow for these separately

Unapproved demolition
Major foundation reinforcement or full-room refitting unless specified
Separate engineering calculations and permit charges unless quoted
Major new footings and kitchen replacement

KNOW WHAT COMES NEXT

From first idea to finished work.

Plan the scope
Determine which walls carry loads before any open-concept demolition.
Prepare and approve
Confirm selections and permits, protect occupied areas and phase demolition.
Complete the work
Complete approved rough work, repairs and finish installation in a coordinated sequence.
Review and close out
Test affected systems and review each room and any agreed punch items.

Planning & preparation: 3–10 weeks
Work on site: 3–12 weeks

Illustrative planning allowance for the stated scope, not a promised start or completion date. On-site time starts after approvals and materials are ready; procurement, inspection waits, curing and discoveries can extend the calendar.

Occupied-home phasing · Hidden damage after demolition · Custom products and multiple trades

PERMIT PLANNING

A permit is required for the stated scope

OKC and Edmond require permits for structural alterations; Edmond also includes cutting away walls or partitions. Confirm the plan and trade permits before demolition.

Removing, moving or cutting a wall or structural member
Changing a building opening or room use
Associated electrical, plumbing or mechanical changes

ENGINEERING & DESIGN

Confirm design requirements

Review the load path, existing supports and proposed changes before work. An engineer may be needed for nonstandard spans, added loads, damage or a reviewer-requested design; a permit alone does not mean every detail needs engineering.

Load-bearing changes or uncertain framing
Nonstandard spans, concentrated loads or damaged supports
Soil, foundation or retaining conditions beyond an approved design

Confirm requirements with the city or county responsible for the property before work begins. The address, exact scope and adopted code determine the final requirements.

Local permit & engineering sources

Oklahoma City — building and trade permits ↗ Edmond — when a permit is needed ↗ Edmond — residential alteration checklist ↗ Edmond — residential alteration/addition checklist ↗

MAKE IT FIT YOUR HOME

Your starting options.

Compare the scope before choosing products. Any direction can be refined with Coastal.

Defined wide opening

Retain side walls with a designed beam and supports.

Plan this option

Flush-ceiling review

Explore a concealed beam where the structure permits.

Plan this option

Visible beam

Consider a dropped beam and planned trim treatment.

Plan this option

MATERIALS & DETAILS

Find your finish.

These original swatches show a general visual direction. Confirm a physical sample, exact finish code and product compatibility before ordering.

Interior wall direction

Warm white

Soft neutral paint direction; confirm a physical sample in room lighting.

Use this direction

Soft greige

Muted warm gray for a coordinated interior palette.

Use this direction

Coastal blue

Muted blue accent direction for selected walls or built-ins.

Use this direction

PRODUCT RESEARCH

Brands & real-world examples.

Manufacturer references help compare options. They do not imply a Coastal dealership, endorsement, or a product selected for your project.

USG Sheetrock

Interior gypsum repair; panel type must match the required assembly.

Sherwin-Williams

Interior paint, subject to substrate and finish specification.

Explore example photos

Open the original source for product and installation imagery. These are reference links, not Coastal project photographs.

Interior renovation with exposed masonry, a wide opening, temporary supports and construction debris

Illustrative interior demolition and layout work photographed in Croatia. Stock photograph; this is not a Coastal project or an example of specified site practices.

YOUR PROJECT, VISUALIZED

Choose a direction.
See it in your space.

Start with common open-concept conversions with structural coordination options, personalize the details, then upload a photo to create an AI concept.